Note: Hazardous chemicals must be shipped via UPS Ground. All other shipping options will be removed from checkout if added to cart. If you need expedited services for non-hazardous products, please make a separate transaction.
Titebond Solvent-Based All Purpose Construction Adhesive is a versatile formula designed for general purpose interior and exterior applications that bonds common building materials.
It is highly water-resistant and offers a longer working time for precise assembly while remaining permanently flexible.
Features & Benefits
- Recommended For: Interior And Exterior Construction, Remodeling & Repair Projects
- Ideal For Interior And Exterior Projects
- Water-Resistant
- Long Working Time
- Compatible Materials: Common Building Materials Including Wood, Paneling, Drywall, Ceramic Tile, Metal, Concrete, Concrete Block, Foamboard And Tub Surrounds.
- Solvent-Based
- Foamboard & Plastics
- Extremely Versatile
Application Guidelines
-
Application Temperature: 0°F to 100ºF
-
Service Temperature Range:-20ºF to 120ºF
- Working Time: Approximately 10-20 minutes for a 1/4" bead
- Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
- Application: Cut tip on slant for 1/4” to 3/8” bead. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Paneling or foam: Apply 1/4” bead around perimeter 1” from edge and two zigzag beads in middle. Framing members:Apply directly to studs. Press materials firmly together with a slight twisting motion. Nail as needed. For drywall, use fasteners in accordance with local building standards. Note: For large panels, bracing may be required until adhesive dries.
- Cleanup: Tools and adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
- Limitations: Not designed for continuous submersion. When applying over paint, wallpaper, ceramic tile or other thin non-porous surfaces, you must first "rough up" the area by sanding or scraping. Do not adhere one non-porous material to another since this will slow or prevent drying. Do not apply to polystyrene foam if the temperature is above 90°F.
Physical Properties
- Type: Synthetic elastomeric polymer
- State: Medium-viscosity mastic
- Color: Tan
- Solids: 74%
- Viscosity: 130,000 cps
- VOC: > 300 g/L
- Flashpoint: < 0ºF
- Freeze / Thaw Stability: Will not freeze
- Storage Life: 18 months in tightly closed containers at 75°F
- Odor: Alcohol-like
Coverage
| Size | 1/8" bead | 1/4" bead | 3/8" bead | 1/2" bead |
| 10 Oz. | 129 ft. | 30 ft. | 14 ft. | 8 ft. |
| 28 Oz. | 355 ft. | 86 ft. | 39 ft. | 21 ft. |