MH-0190-0M10
With extra features like a built-in temperature control thermostat, digital temperature read-out and an error indicator read-out, this heater is a reliable source of heat for a comfortable work environment.
Motor: Heavy-duty, cast aluminum enclosed electric motor
Burner Head: 1-piece cast aluminum
Components: Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Pneumatic tires
Factory Tested for Multiple Fuels: Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel
Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.
pecifications:
| Heat Output | 190,000 BTU |
|---|---|
| Hot-Air Flow | 630 CFM |
| Air Pump Pressure | 8.5 PSI |
| AC Power | 120V, 60Hz, 2.7Amps |
| Motor Size | 1/4 HP |
| Fuel Tank Capacity | 13.0 gallons |
| Fuel Consumption | 1.42 gal./hr. |
| Max. Operating Hours | 9.1 hours |
| Heating Area | 4,300 sq. ft. |
| Multi-Fuel Capable | Yes |
| Digital Temp. Read-Out | Yes |
| Error Indicator Read-Out | Yes |
| Parts Storage System | Yes |
Weights & Dimensions:
| Net Weight | 60.00 lbs. |
|---|---|
| Shipping Weight | 68.00 lbs. |
| Length | 47.00 in. |
| Width | 22.00 in. |
| Height | 28.00 in. |