Brio Action Quart - Case of 12

SKU: 1MAABRIO1
Vendor
Tenax
Regular price
$180.78
Sale price
$180.78
Regular price
$0
Sold out
Unit price
Quantity must be 1 or more

Biodegradable Strong Concrete & Terra Cotta Stain Remover

Booster Alk Strong Stain Remover 1 Quart

Tenax Booster Alk Strong Stain Remover 1 QuartBooster Alk Stain Remover and Grout Cleaner is a sanitizing, biodegradable (more than 90% biodegradable) cleaner for floors and joints. Designed to be highly effective for thorough cleansing of floors and joints with stubborn dirt that resists ordinary cleaners (old dirt, dust, cement residues, soiling caused by smog and atmospheric agents, mold, and other organic dirt). It is also a very effective sanitizer, and it is non-toxic and environmentally friendly. Booster Alk works excellent on marble, granite, ceramic, and terra-cotta. Clean up is a cinch! Because it is biodegradable, it can simply be washed down the drain!Directions:1. Sweep up any loose dirt and clean surface to be treated.2. Spread product generously on surface to be treated using a brush or similar equipment. The layer of product must be at least 1mm thick.3. Leave the product on the surface depending on the degree of the stain. We recommend an average time of 30-60 minutes at 68°. In case of lighter soiling or higher temperature reduce the time to prevent product from drying. During this time the product also sanitizes the surface.4. Rinse thoroughly with water. Depending on the roughness of the surface (smooth, brushed, etc.), the type of dirt (residues of cement, mold, etc.) it may be useful to scour with a brush while rinsing so as to remove any dissolved material from rougher surfaces.5. Discard the solution as it has already exhausted its effectiveness and cannot be reused.6. In case of stubborn dirt and insufficient cleansing, repeat the treatment following steps 1 thru 47. It is recommended to test this product on a small hidden area to determine the correct contact time. On some very shiny surfaces this cleanser may cause partial loss of shine.8. In order to protect the surface and improve its appearance we suggest you treat the surface with a Tenax protective sealer or wax which should be applied to a completely dry surface. Shelf Life:This product will last at least 12 months if kept between 65° and 77°. Keep away from heat, humidity and sunlight.Please read Safety data sheet before usage.

Go to full site